Table Of Contents

Configuration

Version:
    Last Modified: September 16, 2017

    Configure and control a DMM.

    node_icon
    Configures frequency properties used for AC measurements.
    node_icon
    Configures a DMM to compensate for gain drift since the last self-calibration or external calibration.
    node_icon
    Configures the DMM to compensate for offset voltages on the input circuitry.
    node_icon
    Configures the current source for diode measurements.
    node_icon
    Specifies the expected maximum amplitude of the input signal for frequency and period measurements.
    node_icon
    Configure common properties for DMM measurements.
    node_icon
    Configures the properties for multipoint measurements.
    node_icon
    Configures the DMM to compensate for voltage offsets in resistance measurements.
    node_icon
    Specifies the powerline frequency.
    node_icon
    Configures the DMM for waveform acquisitions.
    node_icon
    Configures instrument coupling for voltage waveforms.
    node_icon
    Configure a DMM for temperature measurements.
    node_icon
    Control capacitance and inductance capabilities for supported DMMs.
    node_icon
    Customize triggering functionality for your application.
    node_icon
    Get data about your current DMM configuration.

    Recently Viewed Topics