Configures the A, B, and C parameters for a custom RTD.
Use this node when the RTD Type parameter of Configure RTD Type is set to 0 (Custom).
Instrument identifier from previous NI-DMM nodes.
Default: None
Callendar-Van Dusen A coefficient for RTD scaling.
NI-DMM uses this value to set the RTD A property.
Callendar-Van Dusen B coefficient for RTD scaling.
NI-DMM uses this value to set the RTD B property.
Callendar-Van Dusen C coefficient for RTD scaling.
NI-DMM uses this value to set the RTD C property.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Instrument identifier for subsequent NI-DMM nodes.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported