Table Of Contents

Configure Measurement (Absolute Resolution) (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Configures measurement properties, including absolute resolution.

    connector_pane_image
    datatype_icon

    session in

    Instrument identifier from previous NI-DMM nodes.

    Default: None

    datatype_icon

    function

    Measurement function used to acquire the measurement. NI-DMM sets the Function property to this value.

    datatype_icon

    resolution

    Absolute resolution of the measurement.

    NI-DMM sets the Absolute Resolution property to this value. This parameter is ignored when the Range property is set to Auto Range on or Auto Range once.

    Default: 0.001 V

    datatype_icon

    range

    Range for the measurement, coerced up to the closest input range.

    NI-DMM sets the Range property to this value. Refer to your the specifications document for your DMM for a list of valid ranges.

    Setting Auto Range

    You can configure your DMM for Auto Range using this parameter with the following values:

    Value Configuration Description
    -1.0 Auto Range on NI-DMM performs an Auto Range before acquiring the measurement.
    -2.0 Auto Range off NI-DMM sets the Range to the current Auto Range Value and uses this range for all subsequent measurements until the measurement configuration is changed.
    -3.0 Auto Range once NI-DMM performs an Auto Range before acquiring the next measurement. The Auto Range Value is stored and used for all subsequent measurements until the measurement configuration is changed.

    Default: 0.02 V

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Instrument identifier for subsequent NI-DMM nodes.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA:


    Recently Viewed Topics