Table Of Contents

Create Capture Waveform (Create Capture Waveform (Parallel)) (G Dataflow)

Version:
    Last Modified: September 14, 2017

    Sets the capture waveform settings for parallel acquisition.

    Settings apply across all sites if multiple sites are configured in the pin map. You cannot reconfigure settings after waveforms are created.

    connector_pane_image
    datatype_icon

    waveform name

    Waveform name you want to use.

    Use the waveform name with the capture_start opcode in your pattern.

    datatype_icon

    session in

    Instrument session obtained from the niDigital Initialize with Options node.

    datatype_icon

    pin list

    List of capture pins from the waveform.

    The pin list must match the capture pins in the pattern that references the waveform. The pin order in the pin list determines the bit positions of the data captured by the niDigital Fetch Capture Waveform node.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Handle that identifies the session in all subsequent NI-Digital node calls.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics