Table Of Contents

External Calibration

Version:
    Last Modified: March 3, 2017

    Use the NI-DCPower External Calibration nodes to perform an external calibration of the device. Refer to the manual calibration procedure for your device for more information.

    node_icon
    Calculates calibration constants for the current limit for the specified output channel and range by comparing requested and measured outputs.
    node_icon
    Calculates calibration coefficients for the specified current measurement range by comparing reported and measured outputs.
    node_icon
    Calculates the calibration constants for the residual current offsets for the specified output channel.
    node_icon
    Calculates the calibration constants for the residual voltage offsets for the specified output channel.
    node_icon
    Calculates the calibration constants for the output resistance of the specified channel by comparing requested and measured outputs.
    node_icon
    Calculates calibration constants for the voltage level for the specified output channel by comparing requested and measured outputs.
    node_icon
    Calculates the calibration constants for the voltage measurements returned by the Measure node for the specified output channel by comparing reported and measured outputs.
    node_icon
    Closes the specified calibration session and deallocates the resources that NI-DCPower reserved for calibration.
    node_icon
    Creates a new IVI instrument driver session to the specified power supply or SMU, returns an instrument handle used to identify the device in all subsequent NI-DCPower node calls, and sends initialization commands to set the device to the state necessary for the operation of NI-DCPower.

    Recently Viewed Topics