Table Of Contents

Configure Power Line Frequency (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Specifies the power line frequency for specified channel(s).

    NI-DCPower uses this value to select a timebase for setting the Configure Aperture Time node in power line cycles (PLCs).

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from the Initialize With Channels node.

    datatype_icon

    power line frequency

    Power line frequency in hertz for specified channel(s).

    Valid values are 50 Hz and 60 Hz. Set this parameter to the frequency of the AC power line.

    Relationship to Aperture Time

    Aperture Time
    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Handle used to identify the session in all subsequent NI-DCPower node calls.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Hardware Support:

    This node does not support the following devices:
    • PXI-4110
    • PXI-4130
    • PXIe-4154


    Recently Viewed Topics