Table Of Contents

Configure Auto Zero (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Configures auto zero for the device.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from the Initialize With Channels node.

    datatype_icon

    channel name

    Output channel(s) to which to apply this configuration value.

    Channel Name Syntax

    You can input the channel name with the following options:
    • A single channel, such a 0
    • A list of channels, such as 0,1 or 3,2,1,0.
    • A range of channels, such as 0-7 or 0:7.
    spd-note-note
    Note  

    The order of channels in a list is important. NI-DCPower performs configurations of multiple output channels in the order the channels occur in the list.

    datatype_icon

    auto zero

    Auto-zero value.

    Name Value Description
    Off 0 Disables auto-zero.
    Once 1024 Makes zero conversions following the first measurement after initiating the device. The device uses these zero conversions for the preceding measurement and future measurements until the device is reinitiated.
    On 1 Makes zero conversions for every measurement.
    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Handle used to identify the session in all subsequent NI-DCPower node calls.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Hardware Support:

    This node supports the following devices:

    • PXI-4132


    Recently Viewed Topics