From 1:00 AM - 02:00 AM CST on Saturday, July 4, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Configuration Nodes

Last Modified: April 2, 2018

Use the NI-DCPower Configuration nodes to configure the power supply or source measure unit.

node_icon
Use the NI-DCPower Configuration Information nodes to query configuration information for the power supply or source measure unit.
node_icon
Configures the aperture time on the specified channel(s).
node_icon
Configures auto zero for the device.
node_icon
Enables or disables generation on the specified channel(s).
node_icon
Configures the function that the device attempts to generate for the specified channel.
node_icon
Configures the output resistance that the device attempts to generate for the specified channel(s).
node_icon
Specifies the power line frequency for specified channel(s).
node_icon
Specifies whether to use local or remote sensing of the output voltage on the specified channel(s).
node_icon
Specifies whether to run a single output point or a sequence.
node_icon
Exports the attribute configuration of a session to either a file or a buffer.
node_icon
Imports an attribute configuration to the session from either a file or a buffer.
node_icon
Use the NI-DCPower DC Current nodes for changing channel settings when the channel is configured for the DC Current output function.
node_icon
Use the NI-DCPower DC Voltage nodes for changing channel settings when the channel is configured for the DC Voltage output function.
node_icon
Use the NI-DCPower Pulse Current nodes for changing channel settings when the channel is configured for the Pulse Current output function.
node_icon
Use the NI-DCPower Pulse Voltage nodes for changing channel settings when the channel is configured for the Pulse Voltage output function.
node_icon
Use the NI-DCPower Sequence and Advanced Sequence nodes for configuring the SMU with a series of property or attribute values. You must set the source mode to Sequence.
node_icon
Use the NI-DCPower Triggers and Events nodes to configure triggers and events.

Recently Viewed Topics