Table Of Contents

DAQmx Reserve Network Device (G Dataflow)

Last Modified: January 11, 2018

Reserves the Network DAQ device for the current host. Reservation is required to run NI-DAQmx tasks, and the device must be added in MAX before it can be reserved.

spd-note-note
Note  

This functionality is performed implicitly for the NI 9163, so this node is not supported on the NI 9163 carrier.

connector_pane_image
datatype_icon

dev in

dev in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.

datatype_icon

override reservation?

override reservation? indicates if an existing reservation on the device should be overridden by this reservation. By default, this parameter is set to false.

datatype_icon

error in

error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

datatype_icon

dev out

dev out is the name of the device the operation applied to.

datatype_icon

error out

error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics