Table Of Contents

DAQmx Reset Device (G Dataflow)

Last Modified: August 30, 2018

Immediately aborts all active tasks associated with a device, disconnects any routes, and returns the device to an initialized state. Aborting a task immediately terminates the currently active operation, such as a read or a write. Aborting a task puts the task into an unstable, but recoverable state. To recover the task, use DAQmx Start Task to restart the task, or use DAQmx Stop Task to reset the task without starting it.

This VI does not wait for the device to reset before continuing execution. When resetting a chassis, attached modules are unavailable. If you attempt to reset an attached module during this time, you will receive an error.

connector_pane_image
datatype_icon

dev in

dev in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.

datatype_icon

error in

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

datatype_icon

dev out

dev out is the name of the device the operation applied to.

datatype_icon

error out

error out contains error information. This output provides standard error out functionality.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics