From 1:00 AM - 02:00 AM CST on Saturday, July 4, ni.com will be undergoing system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Table Of Contents
DAQmx Perform Bridge Offset Nulling Calibration (G Dataflow)
Version:
Last Modified: August 30, 2018
Performs a bridge offset nulling calibration on the channels in the task.
If the task measures both bridge-based sensors and non-bridge-based sensors, use the channels input to specify the names of the channels that measure bridge-based sensors.
task in
task in is the name of the task that the operation applies.
channels
channels is a subset of virtual channels in the task that you want to calibrate. Use this input if you do not want to calibrate all the channels in the task, or if some channels in the task measure non-bridge-based sensors. If the input is empty, this node attempts to calibrate all virtual channels in the task.
error in
error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.
skip unsupported channels
skip unsupported channels specifies whether or not to skip channels that do not support calibration. If skip unsupported channels is TRUE, this node calibrates only supported channels. If FALSE, this node calibrates the channels specified by channels. The default is FALSE.
task out
task out is a reference to the task after this node runs.
error out
error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.
Where This Node Can Run:
Desktop OS: Windows
FPGA: LabVIEW NXG does not support FPGA devices
Web Server: Not supported in VIs that run in a web application