Table Of Contents

DAQmx Timing (G Dataflow)

Last Modified: May 7, 2018

Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.

node_icon
Configures when the DAQ device transfers data to a peripheral device, using the onboard Sample Clock of the DAQ device to control burst handshake timing, and exporting that clock for use by the peripheral device.
node_icon
Configures when the DAQ device transfers data to a peripheral device, using an imported sample clock to control burst handshake timing.
node_icon
Configures the task to acquire samples on the rising and/or falling edges of the lines or ports you specify.
node_icon
Determines the number of digital samples to acquire or generate using digital handshaking between the device and a peripheral device.
node_icon
Sets only the number of samples to acquire or generate without specifying timing.
node_icon
Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
node_icon
Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
node_icon
Uses the dt component of the waveform input to determine the Sample Clock rate.

Recently Viewed Topics