From 6:00 PM CST Friday, Feb 15th - 2:00 AM CST Sunday, Feb 17th, ni.com will be undergoing system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 6:00 PM CST Friday, Feb 15th - 2:00 AM CST Sunday, Feb 17th, ni.com will be undergoing system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Removes TEDS information from the physical channel you specify.
This node temporarily overrides any TEDS configuration for the physical channel that you performed in MAX.
physChan in is the name of the physical channel you want to configure. A DAQmx physical channel constant, or control, lists all the physical channels, on devices and modules installed in the system.
You also can wire a string that contains a physical channel name to this input.
error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.
physChan out is the name of the physical channel the operation applied to. A DAQmx physical channel constant, or control, lists all the physical channels, on devices and modules installed in the system.
error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.
Where This Node Can Run:
Desktop OS: Windows
FPGA: LabVIEW NXG does not support FPGA devices
Web Server: Not supported in VIs that run in a web application