From 6:00 PM CST Friday, Feb 15th - 2:00 AM CST Sunday, Feb 17th, will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Plugging in and Registering Your RTSI Cable in MAX

Last Modified: September 15, 2017

To create a multi-device route, the source and destination devices must share a trigger bus both physically and logically in MAX. For PCI devices, you must register your RTSI cable in MAX. For more information on how to register (or add) a RTSI cable in MAX, refer to Measurement & Automation Explorer Help for NI-DAQmx. If you do not register your RTSI cable, NI-DAQmx fails to create a route. PXI trigger backplanes are automatically registered when you identify your chassis type in MAX.

Recently Viewed Topics