Table Of Contents
DAQmx Trigger (G Dataflow)
Last Modified: January 11, 2018
Configures triggering for the task.
The DAQmx Trigger properties include all timing options included in this node and additional timing options.
Start
Configures the task to start acquiring or generating samples immediately upon starting the task.
Configures the task to start acquiring or generating samples on a rising or falling edge of a digital signal.
Configures a task to start acquiring or generating samples when a digital pattern is matched.
Configures the task to start acquiring or generating samples when an analog signal crosses the level you specify.
Configures the task to start acquiring or generating samples when an analog signal enters or leaves a range you specify.
Configures the task to start acquiring or generating samples at a specified time.
Reference
Disables reference triggering for the measurement.
Configures the task to stop the acquisition when the device acquires all pretrigger samples, detects a rising or falling edge of a digital signal, and acquires all posttrigger samples.
Configures the task to stop the acquisition when the device acquires all pretrigger samples, matches a digital pattern, and acquires all posttrigger samples.
Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal reaches the level you specify; and the device acquires all post-trigger samples.
Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal enters or leaves a range you specify; and the device acquires all post-trigger samples.