From 12:00 PM - 4:00 PM CST on Thursday, October 18, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

DAQmx Timing (G Dataflow)

Last Modified: January 11, 2018

Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.

node_icon
Configures when the DAQ device transfers data to a peripheral device, using the onboard Sample Clock of the DAQ device to control burst handshake timing, and exporting that clock for use by the peripheral device.
node_icon
Configures when the DAQ device transfers data to a peripheral device, using an imported sample clock to control burst handshake timing.
node_icon
Configures the task to acquire samples on the rising and/or falling edges of the lines or ports you specify.
node_icon
Determines the number of digital samples to acquire or generate using digital handshaking between the device and a peripheral device.
node_icon
Sets only the number of samples to acquire or generate without specifying timing.
node_icon
Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
node_icon
Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
node_icon
Uses the dt component of the waveform input to determine the Sample Clock rate.

Recently Viewed Topics