Table Of Contents

DAQmx Set Power Up States (Analog » Analog With Output Type) (G Dataflow)

Last Modified: September 18, 2017

Updates power up states for analog physical channels.

connector_pane_image
datatype_icon

analog power up states

analog power up states contains the physical channels and power up states to set. Each element of the array contains a physical channel and the power up state to set for that physical channel.

datatype_icon

physical channels

physical channels is the digital line or port to modify. You cannot modify dedicated digital input lines. The DAQmx physical channel constant lists all lines and ports for devices installed in the system.

You also can wire a string that contains a list or range of digital lines or ports to this input. If you have an array of lines or ports, use the DAQmx Flatten Channel String node to convert the array to a list.

datatype_icon

output type

output type specifies the output type of the physical channel.

Name Description
Voltage

Voltage output.

Current

Current output.

High-Impedance

High-impedance state.

datatype_icon

value

value specifies the value to set the physical channel to on power up.

datatype_icon

error in

error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

datatype_icon

error out

error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics