Table Of Contents

DAQmx Get 4463 Calibration Adjustment Points (G Dataflow)

Last Modified: January 11, 2018

Returns the reference values to be measured by a reference device.

connector_pane_image
datatype_icon

calHandle in

calHandle in is a reference to the calibration session that you created using the DAQmx Initialize External Calibration node.

datatype_icon

terminal configuration

terminal configuration specifies the terminal configuration of the device.

Name Description
Differential

Differential.

Pseudodifferential

Pseudodifferential.

datatype_icon

gain

gain specifies the gain setting to calibrate, in decibels.

datatype_icon

error in

error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

datatype_icon

calHandle out

calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.

datatype_icon

adjustmentPoints

adjustmentPoints is the array of adjustment points returned by the node.

datatype_icon

error out

error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics