Table Of Contents

DAQmx Trigger (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Configures triggering for the task.

    The DAQmx Trigger properties include all timing options included in this node and additional timing options.

    Start

    node_icon
    Configures the task to start acquiring or generating samples immediately upon starting the task.
    node_icon
    Configures the task to start acquiring or generating samples on a rising or falling edge of a digital signal.
    node_icon
    Configures a task to start acquiring or generating samples when a digital pattern is matched.
    node_icon
    Configures the task to start acquiring or generating samples when an analog signal crosses the level you specify.
    node_icon
    Configures the task to start acquiring or generating samples when an analog signal enters or leaves a range you specify.

    Reference

    node_icon
    Disables reference triggering for the measurement.
    node_icon
    Configures the task to stop the acquisition when the device acquires all pretrigger samples, detects a rising or falling edge of a digital signal, and acquires all posttrigger samples.
    node_icon
    Configures the task to stop the acquisition when the device acquires all pretrigger samples, matches a digital pattern, and acquires all posttrigger samples.
    node_icon
    Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal reaches the level you specify; and the device acquires all post-trigger samples.
    node_icon
    Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal enters or leaves a range you specify; and the device acquires all post-trigger samples.

    Recently Viewed Topics