Table Of Contents

DAQmx Timing (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Configures the number of samples to acquire or generate and creates a buffer when needed.

    The DAQmx Timing properties include all timing options included in this node and additional timing options.

    node_icon
    Configures when the DAQ device transfers data to a peripheral device, using the onboard Sample Clock of the DAQ device to control burst handshake timing, and exporting that clock for use by the peripheral device.
    node_icon
    Configures when the DAQ device transfers data to a peripheral device, using an imported sample clock to control burst handshake timing.
    node_icon
    Configures the task to acquire samples on the rising and/or falling edges of the lines or ports you specify.
    node_icon
    Determines the number of digital samples to acquire or generate using digital handshaking between the device and a peripheral device.
    node_icon
    Sets only the number of samples to acquire or generate without specifying timing.
    node_icon
    Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
    node_icon
    Sets the source of the Sample Clock, the rate of the Sample Clock, and the number of samples to acquire or generate.
    node_icon
    Uses the dt component of the waveform input to determine the Sample Clock rate.

    Recently Viewed Topics