Table Of Contents

DAQmx Setup SC Express Calibration (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Sets up calibration for SC Express devices.

    node_icon
    Initializes an NI PXIe-4302 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.
    node_icon
    Initializes an NI PXIe-4303 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.
    node_icon
    Initializes an NI PXIe-4304 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.
    node_icon
    Initializes an NI PXIe-4305 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.
    node_icon
    Writes the specified value to the DAC on the specified physical channel(s) for an NI PXIe-4322. This device requires a sweep of values obtained from the calibration procedure.
    node_icon
    Initializes an NI PXIe-4330 or NI PXIe-4331 device with the specified excitation voltage value for calibration.
    node_icon
    Initializes an NI PXIe-4339 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.

    Recently Viewed Topics