Table Of Contents

DAQmx Reserve Network Device (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Reserves the Network DAQ device for the current host. Reservation is required to run NI-DAQmx tasks, and the device must be added in MAX before it can be reserved.

    spd-note-note
    Note  

    This functionality is performed implicitly for the NI 9163, so this node is not supported on the NI 9163 carrier.

    connector_pane_image
    datatype_icon

    dev in

    dev in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.

    datatype_icon

    override reservation?

    override reservation? indicates if an existing reservation on the device should be overridden by this reservation. By default, this parameter is set to false.

    datatype_icon

    error in

    error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

    datatype_icon

    dev out

    dev out is the name of the device the operation applied to.

    datatype_icon

    error out

    error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: LabVIEW NXG does not support FPGA devices


    Recently Viewed Topics