Table Of Contents

DAQmx Initialize External Calibration (G Dataflow)

    Last Modified: February 6, 2017

    Starts an external calibration session on a device.


    device in

    device in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.



    password is the current calibration password for the device. This password is case sensitive.

    The default password for SCXI-15xx devices is SCXI. The default password for all other NI products is NI.


    error in

    error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.


    calHandle out

    calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.


    error out

    error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: LabVIEW NXG does not support FPGA devices

    Recently Viewed Topics