Table Of Contents

DAQmx Create Timing Source (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Creates a timing source for a Timed Loop.

    The timing source is based on signals a device generates. Timing sources send ticks to a timed loop. Those ticks determine when the Timed Loop executes. By default, the Timed Loop executes each time it receives a tick from a timing source, but other Timed Loop settings can affect when it executes. For example, if you set period in the Loop Configuration dialog to 2, the Timed Loop executes on every other tick the timing source sends.

    The DAQmx Timing Source properties include additional timing source configuration options.

    node_icon
    Creates a timing source that uses a combination of the sample clock and the specified sleep time to determine when to send ticks to a Timed Loop.
    node_icon
    Creates a timing source that sends ticks to a Timed Loop on rising and/or falling edges of one or more digital lines.
    node_icon
    Creates a timing source that sends ticks to a Timed Loop on rising or falling edges of a digital signal.
    node_icon
    Creates a timing source that sends ticks to a Timed Loop at a constant frequency.
    node_icon
    Creates a timing source that uses the signal you specify to determine when to send ticks to a Timed Loop.

    Recently Viewed Topics