Table Of Contents

DAQmx Change External Calibration Password (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Changes the external calibration password of the device.

    connector_pane_image
    datatype_icon

    dev in

    dev in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.

    datatype_icon

    password

    password is the current calibration password for the device. This password is case sensitive.

    The default password for SCXI-15xx devices is SCXI. The default password for all other NI products is NI.

    datatype_icon

    newpassword

    newpassword is the new password for the device. The password can be no longer than four characters.

    datatype_icon

    error in

    error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

    datatype_icon

    dev out

    dev out is the name of the device the operation applied to.

    datatype_icon

    error out

    error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: LabVIEW NXG does not support FPGA devices


    Recently Viewed Topics