Table Of Contents

DAQmx Add Network Device (G Dataflow)

Version:
    Last Modified: February 6, 2017

    Adds a Network cDAQ device to the system and, if specified, attempts to reserve it.

    connector_pane_image
    datatype_icon

    device IP address/hostname

    device IP address/hostname specifies the string containing the IP address (in dotted decimal notation) or hostname of the device to add to the system.

    datatype_icon

    attempt device reservation?

    attempt device reservation? indicates if a reservation should be attempted after the device is successfully added. By default, this parameter is set to false.

    spd-note-note
    Note  

    MAX automatically attempts to reserve a device when the device is added, but this node does not.

    datatype_icon

    device name

    device name indicates the name to assign to the device. If unspecified, NI-DAQmx chooses the device name.

    datatype_icon

    timeout

    timeout specifies the time in seconds to wait for the device to respond before timing out.

    datatype_icon

    error in

    error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.

    datatype_icon

    dev out

    dev out is the name of the device the operation applied to.

    datatype_icon

    error out

    error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: LabVIEW NXG does not support FPGA devices


    Recently Viewed Topics