Table Of Contents

DAQmx Setup SC Express Calibration (4304) (G Dataflow)

    Last Modified: February 6, 2017

    Initializes an NI PXIe-4304 device with the specified mode, range, and excitation for calibration. Refer to the calibration procedure for your device for specific calibration instructions.


    calHandle in

    calHandle in is a reference to the calibration session that you created using the DAQmx Initialize External Calibration node.


    physical channels

    physical channels specifies the physical channel(s) to calibrate.


    range min

    range min specifies the minimum value in the range.


    range max

    range max specifies the maximum value in the range.


    error in

    error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.


    calHandle out

    calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.


    error out

    error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: LabVIEW NXG does not support FPGA devices

    Recently Viewed Topics