Table Of Contents

Trigger (G Dataflow)

Version:
    Last Modified: December 18, 2017

    Use the NI-568x Trigger nodes to configure triggering configuration options.

    node_icon
    Configures the type of trigger source for the RF power meter.
    node_icon
    Configures the internal trigger source and slope of the trigger.
    node_icon
    Configures the internal trigger level of the power meter.
    node_icon
    Configures the external trigger source and slope of the trigger.
    node_icon
    Configures the delay between the trigger and the actual measurement.
    node_icon
    Configures the sensor to wait for the trigger immunity factor before asserting the trigger.
    node_icon
    Configures the trigger hysteresis value, in dB.

    Recently Viewed Topics