Table Of Contents

Configure Duty Cycle Correction (G Dataflow)

Version:
    Last Modified: December 18, 2017

    Enables or disables the duty cycle correction and configures the duty cycle correction for pulse power measurements.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from Initialize With Options.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    channel name

    Name of the channel you want to configure.

    Valid Channel Names:
    • 0
    • empty string ""

    Default: 0

    datatype_icon

    correction enabled

    Boolean value that specifies if the power meter performs a duty cycle correction on the specified channel.

    True Enables duty cycle correction.
    False Disables duty cycle correction.

    Default: False

    datatype_icon

    correction

    Duty cycle correction the power meter uses to calculate the pulse power of a pulse-modulated signal.

    The duty cycle indicates the percentage of time a signal is active high, so specifying a higher value indicates that the device expects the measured signal to be active high a greater portion of the time. The value of this input is specified as a percentage.

    Valid Range: 0.01 to 100

    Default: 100

    datatype_icon

    session out

    Reference to your instrument session passed to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application

    Hardware Support:

    This node supports the following hardware:

    • USB-5681
    • USB-5683
    • USB-5684


    Recently Viewed Topics