Table Of Contents

Configuration (G Dataflow)

Version:
    Last Modified: December 18, 2017

    node_icon
    Configures the unit to which the RF power is converted after measurement.
    node_icon
    Configures the NI-568x acquisition mode.
    node_icon
    Enables or disables auto-ranging on the channel specified.
    node_icon
    Enables or disables the auto-averaging.
    node_icon
    Specifies the offset, in decibels (dB), to apply to the measured value.
    node_icon
    Specifies the frequency, in hertz (Hz), of the input signal.
    node_icon
    Configures the lower and upper range values for a given channel.
    node_icon
    Sets the manual average count that the instrument uses in manual averaging mode.
    node_icon
    Enables or disables the duty cycle correction and configures the duty cycle correction for pulse power measurements.

    Recently Viewed Topics