Table Of Contents

PCI-6010 Pinout

Version:
    Last Modified: March 21, 2017

    Table 1. Default Counter/Timer Terminals
    Counter/Timer Signal Default PFI Terminal
    CTR 0 SRC PFI 0
    CTR 0 GATE PFI 1
    CTR 0 AUX PFI 2
    CTR 0 OUT PFI 6
    CTR 1 SRC PFI 3
    CTR 1 GATE PFI 4
    CTR 1 AUX PFI 5
    CTR 1 OUT PFI 7
    Table 2. Signal Descriptions
    Signal Reference Description

    AI GND

    Analog Input Ground—These terminals are the reference point for single-ended AI measurements in RSE mode and the bias current return point for DIFF measurements. All ground references—AI GND, AO GND, and D GND—are connected on the device.

    AI <0..15>

    Varies

    Analog Input ChannelsFor single-ended measurements, each signal is an analog input voltage channel. In RSE mode, AI GND is the reference for these signals. In NRSE mode, the reference for each AI signal is an AI SENSE.

    For differential measurements, AI 0 and AI 8 are the positive and negative inputs of differential analog input channel 0. Similarly, the following signal pairs also form differential input channels: AI <1,9>, AI <2,10>, and so on.

    AI SENSE

    Analog Input SenseIn NRSE mode, the reference for each AI <0..15> signal is AI SENSE.

    AO <0,1>

    AO GND

    Analog Output Channels—These terminals supply voltage output.

    AO GND

    Analog Output GroundAO GND is the reference for AO. All ground references—AI GND, AO GND, and D GND—are connected on the device.

    D GND

    Digital Ground—D GND supplies the reference for port 0, port 1 digital channels, and PFI. All ground references—AI GND and D GND—are connected on the device.

    PFI <0..5>/P0.<0..5>

    D GND

    Programmable Function Interface or Static Digital Input ChannelsEach PFI terminal can be configured as a timing input signal. You also can use these terminals as static digital input lines.

    PFI <6..9>/P1.<0..3>

    D GND

    Programmable Function Interface or Static Digital Output ChannelsEach PFI terminal can be configured as a timing output signal. You also can use these terminals as static digital output lines.

    NC

    No connect—Do not connect signals to this terminal.


    Recently Viewed Topics