Version:

Last Modified: February 7, 2018

Generates a Reed-Solomon (RS) encoded integer symbol stream in normal format.

RS codes are specialized Bose-Chaudhari-Hocquenghem (BCH) codes in which the code elements are drawn from the Galois field, GF(2*m*). RS codes are extremely powerful at burst error correction. The operations involved in Reed-Solomon encoding and decoding are performed in the GF(2*m*). The RS encoder operates on code words that are symbols or groups of bits. The parameters **code word length (n), symbols** and **data word length (k), symbols** are specified in terms of symbols. Each symbol represents a group of Log_{2}(*n*+1) bits.

The normal RS (*n,k,t*) code consists of values of *n* of the form *n*=2^{ m }-1, where valid values of *m* are 2 to 16, inclusive. For example, specify *n* = 255, *k* = 233 to produce a RS (255,233,11) code. This code has an error-correcting capacity of 11 RS symbols.

The array of integer symbols to be encoded using the RS encoding scheme. Use MT Generate Bits followed by MT Pack Bits to generate the integer symbols required for this parameter.

The RS encoder is a block encoder, which means that it operates on a block of *k* integers. To ensure that the **output symbols** stream corresponds to the entire **input symbols** array, set the length *L* of **input symbols** to be an integer multiple of *k* symbols. If the length *L* is not a multiple of *k* symbols, the last *L* modulo *k* symbols are buffered inside the encoder.
These symbols are added to the incoming **input symbols** stream at the beginning of the next iteration if **reset?** is set to FALSE.

The length of the Reed-Solomon (RS) code word. Each RS symbol represents log_{ 2 }(*n*+1) bits.

**Default: **7

The length of the Reed-Solomon (RS) data word. Each RS symbol represents log_{ 2 }(*n*+1) bits.

**Default: **3

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an **error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

**Default: **No error

The modulation session for configuring selected properties of the Modulation nodes. Use this parameter to configure the advanced properties in the MT RS Symbol Encoder nodes. If MT RS Symbol Encoder is called with an uninitialized modulation session, the node returns an error.

**Default: **0

A Boolean that determines whether the internal state of the encoder is cleared.

**Default: **TRUE

The encoded integer symbol stream. Wire this parameter to the MT RS Symbol Decoder nodes to recover the input data stream.

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

**error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

**Where This Node Can Run: **

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application