Table Of Contents

Live View: A Visual Representation of Hardware in Your System

Last Modified: August 9, 2019

The Live view displays all of the hardware that SystemDesigner can discover in your system. Each device on the Live diagram represents the configuration of a real or simulated device in your system.

Refer to the following image for an example of a device on the Live diagram.

  1. Label and sub-label—Information about the device, such as the device name, hostname, model, product family, and serial number.
  2. Ports—Connections between devices in your system.
  3. Device slots—Controllers, modules, and empty slots.
    spd-note-note
    Note  

    Only some devices support controllers, such as PCs and PXI chassis. If a device does support controllers, the only slot compatible with a controller is the first slot.

  4. Hardware detection type—Glyph that indicates how SystemDesigner discovers the device.
Hardware Detection Type Icon Behavior

Auto-discovered

  • The device automatically appears on the Live diagram.
  • Changes to the live device instantly appear on the Live diagram representation of the device.
  • When the device is unplugged, powered down, or is no-longer reachable, it automatically disappears from the Live diagram.

Manually identified

  • The device may automatically appear on the Live diagram, or you may need to add it. On the document toolbar, click Add Hardware. To locate or add a device, refer to Manually Adding Hardware to the Live View
  • Changes to the live device may automatically appear on the Live diagram. If a change does not appear, you may need to use one of the following methods to view the change in SystemDesigner:
    • Select the device and click Refresh under the Advanced section on the Item tab.
    • Click Identify Instruments to re-scan for GPIB instruments.
  • When the device is removed from the system, you must manually remove it from the Live diagram.

User declared

  • The device does not appear on the Live diagram until you add it manually.
  • Changes to the live device do not apply to the Live diagram device representation. You must manually specify changes in SystemDesigner.
  • To remove the device from the system, you must manually remove it from the Live diagram.

Recently Viewed Topics