Table Of Contents

Waveform Nodes (G Dataflow)

Last Modified: August 15, 2017

Create waveforms and access their components.

node_icon
Replaces the timestamp value (t0) of each waveform in waveform array with the timestamp value of the waveform at the index position you specify.
node_icon
Converts an analog waveform to a digital waveform or digital data.
node_icon
Replaces the dt value of each waveform in the waveform array with the dt value of the waveform at the index position you specify.
node_icon
Converts a digital waveform or digital data to an analog waveform.
node_icon
Returns the ending time value of the specified waveform. The formula this node uses is xf = x0 + duration of the specified waveform.
node_icon
Retrieves a subset of a waveform at a specified time or index.
node_icon
Creates an array of timestamps based on the specified waveform.
node_icon
Returns the X and Y value of a waveform or digital data set.
node_icon
Selects one waveform out of an array of analog or digital waveforms by array index or channel name.
node_icon
Multiplies the delta t component of the waveform by the specified scale factor, which lengthens or shortens the sample rate of the waveform.
node_icon
Computes the duration of the specified waveform using the following equation: duration = (number of samples-1) x dx.
node_icon
Create analog waveforms and access their components.
node_icon
Create digital waveforms and access their components.
node_icon
Convert to and from digital data.

Recently Viewed Topics