Table Of Contents

Pattern Generator (Gaussian Monopulse) (G Dataflow)

Last Modified: January 12, 2018

Generates a signal containing a Gaussian monopulse.

connector_pane_image
datatype_icon

amplitude

Amplitude of the pattern.

Default: 1

datatype_icon

delay

Shifts the pattern in the time axis.

Default: 0

datatype_icon

center frequency

Center frequency, or frequency of the carrier, in Hz.

center frequency must be greater than zero.

Default: 1

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

dt

Sampling interval. This input must be greater than zero. If this input is less than or equal to zero, this node sets the output pattern to an empty array and returns an error.

Default: 0.1

datatype_icon

samples

Number of samples in the pattern.

samples must be greater than 0. Otherwise, this node returns an error.

Default: 128

datatype_icon

t0

Timestamp of the output signal. If this input is unwired, this node uses the current time as the timestamp of the output signal.

This input is available only if you configure this node to return a waveform.

datatype_icon

Gaussian monopulse

Output Gaussian monopulse pattern.

This output can return a waveform or an array of double-precision, floating-point numbers.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Algorithm for Generating the Gaussian Monopulse

If the sequence Y represents Gaussian monopulse, this node generates the pattern according to the following equations:

y i = 2 π a e x i f c e 2 ( π x i f c ) 2

and

X i = i * Δ t d

for i = 0, 1, 2, ..., n - 1

where

  • a is the amplitude
  • d is the delay
  • fc is the center frequency
  • n is the number of samples

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics