Table Of Contents

FIR Narrowband Filtering (G Dataflow)

Last Modified: January 12, 2018

Filters an input sequence using a specific interpolated FIR (IFIR) filter.

Programming Patterns

You can use the FIR Narrowband Filter Design node to generate the IFIR Filter for this node.

connector_pane_image
datatype_icon

signal

Input signal.

This input accepts the following data types:

  • 1D array of double-precision, floating-point numbers
  • 1D array of complex double-precision, floating-point numbers
  • Waveform
  • Waveform in complex double-precision, floating-point numbers
  • 1D array of waveforms
  • 1D array of waveforms in complex double-precision, floating-point numbers
datatype_icon

IFIR filter

The IFIR filter.

datatype_icon

filter type

Passband of the filter.

Name Description
Lowpass

Uses a lowpass filter.

Highpass

Uses a highpass filter.

Bandpass

Uses a bandpass filter.

Bandstop

Uses a bandstop filter.

Default: Lowpass

datatype_icon

interpolation

Interpolation factor.

The model filter is stretched by interpolation times.

datatype_icon

model filter

Coefficients of the model filter.

datatype_icon

image suppressor

Coefficients of the filter image suppressor.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

filtered signal

Filtered signal.

This output can return the following data types:

  • 1D array of double-precision, floating-point numbers
  • 1D array of complex double-precision, floating-point numbers
  • Waveform
  • Waveform in complex double-precision, floating-point numbers
  • 1D array of waveforms
  • 1D array of waveforms in complex double-precision, floating-point numbers
datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Algorithm for Calculating the Delay for the Filter

The overall filter is a linear-phase FIR filter. This node calculates the delay for the filter using the following equation:

delay = [ ( N G 1 ) M + N I ] 2

where

  • NG is the number of elements in Model Filter
  • NI is the number of elements in Image Suppressor
  • M is the value of interpolation

Where This Node Can Run:

Desktop OS: Windows

FPGA: This product does not support FPGA devices

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics