Table Of Contents

Waveform Scalar Limit Comparison (G Dataflow)

Version:
    Last Modified: May 9, 2017

    Compares the waveform data values to a scalar value.

    connector_pane_image
    datatype_icon

    waveform

    The waveform that includes the data you want to compare to a specified limit.

    datatype_icon

    compare condition

    The comparison operation you want to use to compare the waveform data value to the scalar value.

    Name Value Description
    < 0 The highest or lowest value in the waveform is less than the limit.
    <= 1 The highest or lowest value in the waveform is less than or equal to the limit.
    > 2 The highest or lowest value in the waveform is greater than the limit.
    >= 3 The highest or lowest value in the waveform is greater than or equal to the limit.

    Default: 3

    datatype_icon

    limit

    Number to which you want to compare the highest or lowest data value in the waveform.

    Default: 5

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    waveform and result

    Two waveforms in an array. The first element is a copy of data. The second element is the failure waveform, which is a copy of data with all elements that passed replaced by NaN. All valid elements are failures.

    datatype_icon

    passed?

    A Boolean value indicating whether the highest or lowest data value meets the compare condition based on the limit.

    True The highest or lowest data value meets the comparison.
    False The highest or lowest data value does not meet the comparison.
    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: This product does not support FPGA devices


    Recently Viewed Topics