Table Of Contents

Get XY Value (G Dataflow)

Version:
    Last Modified: April 4, 2017

    Returns the X and Y value of a waveform or digital data set.

    connector_pane_image
    datatype_icon

    waveform

    Waveform from which to retrieve a specified data value (X and Y value).

    This input accepts a waveform or a digital waveform.

    This input is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this input changes to digital data in.

    datatype_icon

    digital data

    Digital table for which you want to retrieve the X and Y values.

    This input is available when you wire a digital table to waveform. If you wire a waveform or digital waveform to digital data, this input changes to waveform.

    datatype_icon

    Y position format

    Data value of the specified element or at a specified time.

    This input is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this input changes to start.

    Name Value Description
    Samples 0 Data value of the specified sample in the waveform data.
    Relative Time 1 Data value at a specified time relative to the first point in the waveform.

    Default: Samples

    datatype_icon

    start

    Data element or time value where you want to start acquiring X and Y values.

    This input is available when you wire a digital table to waveform in. If you wire a waveform or digital waveform to digital data in, this input changes to Y position format.

    Default: 0

    datatype_icon

    Y position

    Element number you want from the set of waveform data or the value at a specified time.

    For example, if you want the value of the 200th scan, wire 199 to this input. If you want the value at time 100, wire 100 to this input. You specify whether this input operates based on samples or relative time in Y position format.

    In Relative Time mode, this node determines whether the value wired to this input is an integer multiple of dt. If the value is not an integer multiple of dt, the node uses the closest exact multiple of dt.

    This input is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this input is not available.

    Default: 0

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    X value

    Timestamp that captures the X value of the waveform at the location or time you specify.

    This output is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this output changes to compressed index.

    datatype_icon

    compressed index

    Index of the data element or time value with respect to the compressed waveform.

    For example, if the actual sample number is 8 but the sample is compressed in a portion of the waveform that starts at 3, the compressed index is 3.

    This output is available when you wire a digital table to waveform in. If you wire a waveform or digital waveform to digital data in, this output changes to X value.

    datatype_icon

    actual Y position

    Index or time value of the point this node returns.

    This output is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this output changes to sample number.

    datatype_icon

    sample number

    Sample number of the data element or time value. If the value of start is inside a compressed portion of the waveform, this node calculates the sample number as if the waveform were not compressed.

    This output is available when you wire a digital table to waveform in. If you wire a waveform or digital waveform to digital data out, this output changes to actual Y position.

    datatype_icon

    Y value

    Integer that captures the Y value of the waveform at the location you specify.

    This output is an integer array of Y values when you wire a digital waveform to waveform in.

    This output is available when you wire a waveform or digital waveform to digital data in. If you wire a digital table to waveform in, this output changes to digital value.

    datatype_icon

    digital value

    Integer array of Y values.

    This output is available when you wire a digital table to waveform in. If you wire a waveform or digital waveform to digital data in, this output changes to Y value.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
    datatype_icon

    waveform data value

    Values of the digital waveform data.

    This output is available when you wire a digital waveform to waveform in or digital data in. If you wire a digital table to waveform in or digital data in, this output changes to digital data value. If you wire an analog waveform to waveform in or digital data in, this output is not available.

    datatype_icon

    digital data value

    Values of the digital data.

    This output is available when you wire a digital table to waveform in. If you wire a digital waveform to waveform in or digital data in, this output changes to digital waveform value. If you wire a waveform to waveform in or digital data in, this output is not available.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: This product does not support FPGA devices


    Recently Viewed Topics