Table Of Contents

Boolean Array to Digital (Digital Waveform) (G Dataflow)

Version:
    Last Modified: March 31, 2017

    Converts a 2D Boolean array to a digital waveform.

    connector_pane_image
    datatype_icon

    compress data

    Boolean that specifies whether to compress the digital output.

    Default: False

    datatype_icon

    boolean array

    2D Boolean array you want to convert.

    Default: False

    datatype_icon

    sample rate

    Frequency in samples per second of the digital waveform output.

    Default: 1000

    datatype_icon

    mode

    Enum that specifies whether to perform the conversion on the data with the least significant bit (LSB) first or most significant bit (MSB) first.This input determines the order of the digital data output by the node.

    Name Value Description
    LSB First 0 The conversion is performed on the least significant bit first.
    MSB First 1 The conversion is performed on the most significant bit first.

    Default: LSB First

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    digital waveform

    Converted digital waveform. The order of the digital data in this output reflects the bit direction selected in mode.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: This product does not support FPGA devices


    Recently Viewed Topics