Table Of Contents

Create Real Matrix from Eigenvalues (G Dataflow)

Last Modified: March 15, 2017

Generates a real matrix from a specified set of eigenvalues.

connector_pane_image
datatype_icon

eigenvalues

Eigenvalues from which to create the real matrix. Eigenvalues must be real or conjugate pairs.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

matrix

Real matrix whose eigenvalues you specified.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Algorithm for Calculating the Eigenvalues

This node generates the output matrix in the following form:

[ 0 1 0 0 0 0 1 0 0 0 0 1 0 0 0 1 a 0 a 1 a 2 a n 2 a n 1 ] n × n

where n is the length of the input eigenvalues and a0, a1, ..., an-1 are the coefficients of the polynomial P(x).

The following equation defines P(x):

P ( x ) = ( x λ 0 ) ( x λ 1 ) ( x λ n 1 ) = a 0 + a 1 x + a 2 x 2 + + a n 1 x n 1 + x n

where λ0, λ1, ..., λn - 1 are the elements in eigenvalues.

Where This Node Can Run:

Desktop OS: Windows

FPGA: This product does not support FPGA devices


Recently Viewed Topics