Generates a signal containing a sine, square, sawtooth, or triangle wave, based on the input.
Type of signal to generate.
|Sine Wave||0||Generates a signal containing a sine wave.|
|Triangle Wave||1||Generates a signal containing a triangle wave.|
|Square Wave||2||Generates a signal containing a square wave.|
|Sawtooth Wave||3||Generates a signal containing a sawtooth wave.|
Default: Sine Wave
DC offset of the signal.
Amplitude of the signal. The amplitude is also the peak voltage.
Frequency of the signal in Hz.
Initial phase, in degrees, of the signal.
This node ignores phase in if reset phase is False.
Percentage of time a square wave remains high versus low over one period.
square wave duty cycle is valid only if signal type is Square Wave.
Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.
Default: No error
Sampling rate in samples per second.
Number of samples in the signal.
Phase of the signal in degrees.
Error information. The node produces this output according to standard error behavior.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported