Resamples a waveform that is represented by time-value pairs.
The sampling interval, in seconds, between data points in the resampled signal.
Timestamp value for the resampled signal.
If resampled t0 is less than the first X value of XY-data, the value is adjusted.
Algorithm this nodes uses to perform alignment of waveforms.
|coerce||0||This node sets each output sample value to the input sample value that is closest to it in time.|
|linear||1||This node sets each output sample value to the linear interpolation between the two input samples that are closest to it in time.|
|spline||2||This node uses the spline interpolation algorithm to compute the resampled values.|
|FIR filter||3||This node uses a finite impulse response (FIR) filtering algorithm to compute the resampled values.|
Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.
Default: No error
This output can return a waveform or an array of waveforms.
The actual timestamp of the resampled waveform and also is the first X value of the array of XY pairs containing the resampled signal.
Error information. The node produces this output according to standard error behavior.
A Boolean that indicates whether the actual start time of the resampled signal equals the start time value you specified.
|True||The actual start time of the resampled signal does not equal the start time value you specified.|
|False||The actual start time of the resampled signal equals the start time value you specified.|
This output is available only if you wire a waveform or an array of waveforms to signal.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported