Table Of Contents

Sound File Open (Sound File Write Open) (G Dataflow)

Version:
    Last Modified: January 12, 2018

    Opens a .wav file for writing.

    connector_pane_image
    datatype_icon

    sound file

    Absolute path to the .wav file.

    If the path is empty or invalid, the node returns an error in error out.

    datatype_icon

    sound format

    The acquisition rate, the number of channels, and the bits per sample of the sound operation. The values for each of these elements is dependent on your sound card.

    Not all operating systems and sound cards support all sample rate (S/s), number of channels, or bits per sample options.

    Performance Details

    sample rate (S/s) and bits per sample use more computer memory when set to a higher value.

    datatype_icon

    sample rate (S/s)

    Sampling rate for the sound operation. Common rates are 44,100 S/s, 22,050 S/s, and 11,025 S/s.

    Default: 22,050 S/s

    datatype_icon

    number of channels

    Number of channels. This input can accept as many channels as the sound card supports. For most sound cards 1 is mono and 2 is stereo.

    Default: 2

    datatype_icon

    bits per sample

    Quality of each sample in bits. Available resolutions are 8 bits, 16 bits, and 32 bits.

    Default: 16 bits

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    reference

    Reference to the .wav file specified by sound file. You can pass reference to other Sound Files nodes to interact with the .wav file.

    datatype_icon

    error out

    The node produces this output according to standard error behavior.

    This node can return the following error codes.

    4805 Could not find the sound file.
    spd-note-note
    Note  

    This is not a comprehensive list of errors this node can return.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics