Table Of Contents

niUSRP Properties (G Dataflow)

Last Modified: January 9, 2017

Gets (reads) or sets (writes) NI-USRP properties. When you read a property, NI-USRP analyzes the current configuration in order to return the coerced value for that property. Setting a property may transition the session to the Initialized state.


niUSRP in

Reference to the niUSRP session.


error in

Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

Default: no error


Active Channel

Specifies the channel name used to access all subsequent properties in this instance of the property node. If the property you want to use is channel-based, you must first select this property and then pass the name of the specific channel. If the property you specify is not channel-based, or you want to set the property on all channels, pass an empty string or omit setting this property.

Enter 0 for the first channel and 1 for the second channel. The order of the IP addresses sets the channel order.

Default: "" (empty string)


niUSRP out

Reference to the niUSRP session.


error out

Error information. The node produces this output according to standard error behavior.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Recently Viewed Topics