Table Of Contents

niUSRP Configure Signal (G Dataflow)

Last Modified: January 9, 2017

Configures properties of the transmit (Tx) or receive (Rx) signal.

connector_pane_image
datatype_icon

active antenna

The antenna port to use for this channel.

datatype_icon

session handle

Your instrument session.

datatype_icon

gain

The aggregate gain, in dB, applied to the RF signal.

datatype_icon

carrier frequency

The carrier frequency, in Hz, of the RF signal.

datatype_icon

IQ rate

The rate of the baseband I/Q data in samples per second (S/s).

datatype_icon

channel list

The channels to configure.

datatype_icon

error in (no error)

Error conditions that occur before this node runs. This input provides standard error in functionality.

datatype_icon

status

A Boolean that is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

datatype_icon

code

The error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

datatype_icon

source

The origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

datatype_icon

coerced gain

The actual gain, in dB, for this session, coerced to a value supported by the device.

datatype_icon

coerced carrier frequency

The actual carrier frequency, in Hz, for this session, coerced to a value supported by the device.

datatype_icon

coerced IQ rate

The actual I/Q rate, in samples per second (S/s), for this session, coerced to a value supported by the device.

datatype_icon

session handle out

A reference to your instrument session to be passed to the next node.

datatype_icon

error out

Error information. This output provides standard error out functionality.

datatype_icon

status

A Boolean that is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

datatype_icon

code

The error or warning code. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

datatype_icon

source

The origin of the error or warning. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported


Recently Viewed Topics