Table Of Contents

Deploying and Testing a Real-Time Application

Version:
    Last Modified: April 13, 2016

    After you have finished implementing your application design, you can deploy the application to a real-time controller and use benchmarking tools to test the determinism of your application.

    You must have a working real-time application before you can deploy a real-time application. Refer to Implementing a Real-Time Application Design for help writing a real-time application.

    Complete the following steps to deploy and test your real-time application.

    1. Register a real-time system—You must register your real-time system so that SystemDesigner can detect it and provide a visual representation of your hardware.
    2. Deploy and run code on a real-time controller—When you run a VI that is targeted to a real-time controller, the VI is deployed and runs on the controller.
    3. Benchmark the performance and determinism of your real-time application—Real-time VIs offer unique benchmarking tools to test the determinism of your application. Use these benchmarking tools to verify that your application meets your timing requirements.

    Recently Viewed Topics