Table Of Contents

Wave Generator (Sine) (G Dataflow)

Version:
    Last Modified: January 9, 2017

    Generates a signal containing a sine wave.

    connector_pane_image
    datatype_icon

    offset

    DC offset of the signal.

    Default: 0

    datatype_icon

    reset phase

    A Boolean that determines the initial phase of the wave.

    True Sets the initial phase to the value of phase in.
    False Uses the value of phase out from when the node last executed as the initial phase of the wave.

    Default: False

    datatype_icon

    amplitude

    Amplitude of the signal.

    Default: 1

    datatype_icon

    frequency

    Frequency of the signal.

    Default: The default value of this input changes depending on how you configure this node. If you configure this node to return a waveform, the default is 10 Hz. If you configure this node to return an array of double-precision, floating point numbers, the default is 0.0078125 Hz.

    datatype_icon

    phase in

    Initial phase in degrees of the signal when reset phase is True.

    Default: 0

    datatype_icon

    error in

    Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

    Default: No error

    datatype_icon

    sample rate

    Sample rate in samples per second.

    Default: The default value of this input changes depending on how you configure this node. If you configure this node to return a waveform, the default is 1000. If you configure this node to return an array of double-precision, floating point numbers, the default is 1.

    datatype_icon

    samples

    Number of samples in the signal.

    Default: The default value of this input changes depending on how you configure this node. If you configure this node to return a waveform, the default is 1000. If you configure this node to return an array of double-precision, floating-point numbers, the default is 128.

    datatype_icon

    sine wave

    Output sine signal.

    This output returns a waveform or an array of double-precision, floating point numbers.

    datatype_icon

    phase out

    Phase, in degrees, of the next sample of the output signal.

    datatype_icon

    error out

    Error information. The node produces this output according to standard error behavior.

    Algorithm for Simulating a Sine Wave

    If sequence Y represents a sine wave, this node generates the pattern according to the following equation.

    y [ i ] = amplitude × sin ( phase [ i ] ) , for i = 0 , 1 , 2.... , n 1

    where n is the number of samples, and phase [ i ] is:

    initial_phase + frequency × 360 × i samples per second

    where initial_phase is the initial phase of the wave.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics