Table Of Contents

Wave Generator (Configurable) (G Dataflow)

Version:
    Last Modified: January 9, 2017

    Generates a signal containing a sine, square, sawtooth, or triangle wave, based on the input.

    connector_pane_image
    datatype_icon

    signal type

    Type of signal to generate.

    Name Value Description
    Sine Wave 0 Generates a signal containing a sine wave.
    Triangle Wave 1 Generates a signal containing a triangle wave.
    Square Wave 2 Generates a signal containing a square wave.
    Sawtooth Wave 3 Generates a signal containing a sawtooth wave.

    Default: Sine Wave

    datatype_icon

    offset

    DC offset of the signal.

    Default: 0

    datatype_icon

    reset phase

    A Boolean that determines the initial phase of the wave.

    True Sets the initial phase to the value of phase in.
    False Uses the value of phase out from when the node last executed as the initial phase of the wave.

    Default: False

    datatype_icon

    amplitude

    Amplitude of the signal. The amplitude is also the peak voltage.

    Default: 1

    datatype_icon

    frequency

    Frequency of the signal in Hz.

    Default: 10

    datatype_icon

    phase in

    Initial phase, in degrees, of the signal.

    This node ignores phase in if reset phase is False.

    Default: 0

    datatype_icon

    square wave duty cycle

    Percentage of time a square wave remains high versus low over one period.

    square wave duty cycle is valid only if signal type is Square Wave.

    Default: 50

    datatype_icon

    error in

    Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

    Default: No error

    datatype_icon

    sample rate

    Sampling rate in samples per second.

    Default: 1000

    datatype_icon

    samples

    Number of samples in the signal.

    Default: 1000

    datatype_icon

    signal

    Output signal.

    datatype_icon

    phase out

    Phase of the signal in degrees.

    datatype_icon

    error out

    Error information. The node produces this output according to standard error behavior.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics