Table Of Contents

TraceTool Load Trace and Send (G Dataflow)

Version:
    Last Modified: January 9, 2017

    Loads a trace session file and sends the trace session to the Real-Time Trace Viewer running on the host computer. Find the Real-Time Trace Viewer by searching from the Start menu of the host computer.

    Use the TraceTool Stop Trace and Save node to save a trace session to file on the RT target.

    connector_pane_image
    datatype_icon

    path to trace log

    Path to the trace session file on the RT target.

    datatype_icon

    trace host network address

    The IP address of the host computer where you want to send the trace session. The Real-Time Trace Viewer must be running on the host computer to receive the trace session.

    datatype_icon

    error in

    Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

    Default: No error

    datatype_icon

    error out

    Error information. The node produces this output according to standard error behavior.

    Where This Node Can Run:

    Desktop OS: none

    FPGA: Not supported


    Recently Viewed Topics