Table Of Contents

To Fixed-Point (G Dataflow)

Last Modified: January 9, 2017

Converts any non-complex number to fixed-point representation.

If you do not wire a value to the fixed-point type input or configure the output settings of this function, the data type of the fixed-point output adapts to the data you wire to the number input. For example, if you wire an 8-bit unsigned integer to the number input, LabVIEW returns an 8-bit unsigned fixed-point number with 8 integer bits. This function saturates the number by default if overflow occurs.



Any non-complex number.


fixed-point type

The fixed-point data type to which you want to convert the integer data. LabVIEW ignores any data in the constant or control that you wire to fixed-point type.



Is the input data scaled to the requested fixed-point data type.



A Boolean that describes whether the result of the operation is outside the range of values that the output type can represent.

TRUE Overflow occurred.

For complex numbers, the output is TRUE if either the real or imaginary parts overflow.

FALSE Overflow did not occur.

Where This Node Can Run:

Desktop OS: Windows

FPGA: All devices (only within an Optimized FPGA VI)

Recently Viewed Topics